|
120 Gigabyte 4 Channel Mobile DVR for Continuous Recording with Audio and GPS -Recomended-
The DVR-HD1 complete system includes 4 small B/W basic cameras, GPS and 1 microphone as well as the standard 120 Gigabyte hard drive.
It is designed to function when your vehicle is operating or for minutes after your vehicle is not running. This system can be set up for trigger based recording as well as continuous recording. The standard 120 Gigabyte hard drive will store a maximum of 162 hours with audio.
| NTSC (Audio OFF) |
Possible Recording Time HDD=120GB ( hour ) |
| Image Quality |
BEST |
22.2 |
36 |
54 |
90 |
198.6 |
451.8 |
885.6 |
1536.6 |
4357.8 |
6528 |
8698.2 |
| HIGH |
27 |
43.2 |
64.8 |
108 |
238.2 |
542.4 |
1063.2 |
1844.4 |
5229.6 |
7833.6 |
10438.2 |
| STANDARD |
33.6 |
54 |
81 |
135.6 |
298.2 |
678 |
1329 |
2305.2 |
6537 |
9792.6 |
13047.6 |
| BASIC |
45 |
67.8 |
101.4 |
169.2 |
372.6 |
847.2 |
1661.4 |
2881.8 |
8171.4 |
12240.6 |
16309.8 |
| Refresh Rate (Frame/Sec) |
30 |
15 |
10 |
6 |
2.7 |
1.2 |
0.61 |
0.35 |
1/8 |
1/12 |
1/16 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| NTSC (Audio ON) |
Possible Recording Time HDD=120GB ( hour ) |
| Image Quality |
BEST |
22.2 |
36 |
53.4 |
88.2 |
- |
- |
- |
- |
- |
- |
- |
| HIGH |
27 |
43.2 |
63.6 |
105.6 |
- |
- |
- |
- |
- |
- |
- |
| STANDARD |
33.6 |
54 |
79.2 |
130.8 |
- |
- |
- |
- |
- |
- |
- |
| BASIC |
45 |
67.8 |
99 |
162.6 |
- |
- |
- |
- |
- |
- |
- |
| Refresh Rate (Frame/Sec) |
30 |
15 |
10 |
6 |
2.7 |
1.2 |
0.61 |
0.35 |
1/8 |
1/12 |
1/16 |
Video is retrieved using a SD card, USB cable connected to a computer, or watched directly through a video source.
Click Here to Download Brochure
Click Here to Download Operations Manual
FEATURES
- Real-time recording and playback. (30/25 frames per channel).
- Four alarm inputs, two alarm outputs: the alarm input is triggered by
- (a) bus doors opening or closing
- (b) lights signaling a vehicle's direction changes,
- (c) sirens on police cars, and
- (d) pressing the help button to signal distress.
- The two alarm outputs allow devices such as lights or audible alarms to be activated by an alarm input.
- 4 x Din connectors for 4 video inputs (total 1A) and 2 audio inputs.
- The DVR-HD1 can be neatly installed in its compartment below the radio in your own car.
- Pre-alarm recording of 50 images.
- USB interface for PC software access and SD card for backup storage.
- 1 fixed 2.5" HDD as storage medium.
- Supports GPS (RS-232 interface).
- Vibration and Shock:
- Vibration: 1.25G(Random) / 0.8G (Sine).
- Mechanical shock: 8G.
SPECIFICATIONS
- Image systems: NTSC PAL
- Video Input: 4 x 6 pin DIN Convector ( Output: DC 12V Supported / total 1A)
- Audio Input: Line in (RCAx2)
- Audio output: Line out (RCA) x1
- Storage Media: > 40GB, 1 fixed 2.5" HDD
- Recording Mode: Manual / Alarm
- Recording Rate: 30 fps (per channel) (NTSC) 25 fps (per channel) (PAL)
- Resolution: 352x240 @ 30 FPS x 4 (NTSC) 352x288 @ 25 FPS x 4 (PAL)
- Image Size: Best (64KB) / High (32KB) / Standard (21KB) / Basic (16KB)
- Recording List: 3000
- Recording Selection: Choosing two from 4 x 6pin DIN connectors and 2 Audio Outputs
- Alarm Recording: Pre-Alarm / Post-Alarm
- Pre-Alarm Recording: 50 images
- Playback: Speeds:
- Fast Forward: 1X, 2X, 4X, 8X, 16X, 30X, 100X,
- Reverse:1/2X, 1/4X,1/8X, 1/16X
- Compression: MJPEG
- Window Division: 1 / 2 / 3 / 4
- Search: Record List / Event List / Time & Date / Thumbnail
- USB: Yes
- SD Card: Yes
- Watermark: Digital Signature
- Password Protection: Operation / Menu Setup
- GPIO Input/Output: Input: BNC x 4, Output: BNC x 2
- Communication Port: RS-232
- Software Update: SD Card
- GPS Supported: Yes
- Built-in Buzzer: Yes
- Wired Remote Controller: Yes (Length: 3M)
- Vibration: 1.25G (Random) / 0.8G (Sine)
- Mechanical Shock: 8G
- Operation Power: DC 12V
- Dynamic Voltage Management: DC 11~14.5V
- Delay-off: Yes (Max. 20A)
- Operation Temperature: Standard HDD: 0-45°C, Industrial HDD: 0-65°C
- Certificate: FCC / CE / RoHS / E/e-mark
4 Black & White Cameras bwvid-101
1. 2. 3. 4.
This GPS antennae connects to our mobile DVR-HD1. This system will integrate with Microsoft Map Point or Maction PaPaGo map software to track where the vehicle was when the video was captured.
This Audio microphone connects to our mobile DVR-HD1.
|
